Hardwood Floor Refinishing & Installation in Roswell, GA

Hardwood Flooring in Roswell, GA

Roswell has some of the oldest housing stock in our entire service area, and it changes how we approach a job. Along Canton Street and through Historic Roswell, you'll find homes dating back well over a century, many with original heart pine or narrow-strip oak that's been through multiple refinishes over the decades. That kind of floor needs a lighter touch than a ten-year-old subdivision floor — less aggressive sanding, more attention to how much wood is actually left to work with before you hit a nail or a seam that was never meant to be exposed.

Access into Roswell is easy off GA-400, and Fulton County makes up the bulk of what we cover here, from the historic district out toward the newer neighborhoods further from the river. Whether it's a Victorian-era home near Canton Street or a 1990s build further out, the work is the same: an honest look at what the floor can handle before we recommend a plan.

Our Services in Roswell, GA

• Hardwood floor refinishing, including antique and historic floors
• Heart pine and narrow-strip oak restoration
• Solid and engineered hardwood installation
• Hardwood repairs and board replacement
• Screen and recoat service
• Laminate and LVP installation
• Stair and tread refinishing to match original wood

Hardwood Floor Installation in Roswell

New hardwood in Roswell starts with what the floor will sit on. We check a wood subfloor for moisture, squeaks and level before any wood goes down, and on a concrete slab we moisture-test first, because solid hardwood generally can’t go straight over concrete. Our hardwood floor installation page covers the process.

Fixing the subfloor first

One Roswell job shows why. We removed old tile mud beds and hardwood that had been installed incorrectly over particle board, then added new plywood and sleepers to level the subfloor. The new select grade white oak was installed on top of that and finished with Provincial stain and oil-based polyurethane. The staircase was replaced too, with new box newels and square white balusters. You can watch the job under Watch Our Work in Roswell, GA.

Solid or engineered

Solid hardwood is nailed to a wood subfloor and can be sanded and refinished again later. Engineered hardwood has a real-wood top layer and can be glued down or floated, which is why it is often the choice over a slab or in a basement. Our engineered hardwood page goes into more detail.

Matching new boards into an existing floor

When new hardwood has to meet an existing floor, we lace the new boards in, so the new wood runs into the old instead of stopping at a straight seam. On that Roswell job, the new select grade white oak was laced in. If stairs or existing hardwood are part of your project, tell us early so we can match species, plank width and stain. If part of a floor can be saved, our hardwood floor repairs page covers that.

A Roswell Project Note

In Historic Roswell, original heart pine or oak may already have been sanded down close to its limit by a previous owner or a past refinishing job done without checking the wood's remaining thickness first. We measure before we sand, and if a floor genuinely can't take another full pass, we'll say so and talk through options like a screen and recoat or selective board replacement instead of risking the original wood.

Frequently Asked Questions